Care Instructions for Energy Saving Packaging Machine

October 10, 2022

Care Instructions for Energy Saving Packaging Machine

Regularly check the parts, once a month, check whether the worm gear, worm, bolts on the lubricating block, bearings and other moving parts are flexible and worn. If defects are found, they should be repaired in time, and should not be used reluctantly.

High Efficient Packaging Machine should be used in a dry and clean room, and must not be used in places where the atmosphere contains acids and other gases that are corrosive to the body.
After the Easy to maintain packaging machine is used or stopped, the rotating drum should be taken out for cleaning and the remaining powder in the bucket should be cleaned, and then installed, ready for the next use.
Professional Packaging Machine

When the drum moves back and forth during work, please adjust the M10 screw on the front bearing to the proper position. If the gear shaft moves, please adjust the M10 screw behind the bearing frame to the appropriate position, adjust the clearance so that the bearing does not make noise, turn the pulley by hand, and the tightness is appropriate. Too tight or too loose can cause damage to the machine. .
If it is not used for a long time, the Professional Packaging Machine must be wiped clean.

The above is the Care Instructions for Energy Saving Packaging Machine we have listed for you. You can submit the following form to obtain more industry information we provide for you.

You can visit our website or contact us, and we will provide the latest consultation and solutions

Share to:

Send Inquiry

Next:Advantages of Higher Cost Performance Packaging Machine